Difference between revisions of "Reprap Prusa"
Jump to navigation
Jump to search
m (Danspencer101 moved page Project:Reprap Prusa to Reprap Prusa over redirect) |
|||
(11 intermediate revisions by 6 users not shown) | |||
Line 1: | Line 1: | ||
+ | {{stub}} | ||
+ | |||
+ | |||
+ | = [[Yrs3d|See YRS 3d Printer page]] = | ||
+ | [[Image:Reprap-demo-on-open-day-2011.jpg|thumb|none|350px]] | ||
+ | |||
Main source of information: the Prusa page at reprap.org -- http://reprap.org/wiki/Prusa | Main source of information: the Prusa page at reprap.org -- http://reprap.org/wiki/Prusa | ||
Line 14: | Line 20: | ||
| M8 nut | | M8 nut | ||
| Fastener | | Fastener | ||
− | | Buy a 100-pack to be on the safe side. | + | | Buy a 100-pack to be on the safe side. (GOT) |
|+ | |+ | ||
| 93 | | 93 | ||
| M8 washer | | M8 washer | ||
| Fastener | | Fastener | ||
− | | Buy a 100-pack to be on the safe side. | + | | Buy a 100-pack to be on the safe side. (GOT) |
|+ | |+ | ||
| 6 | | 6 | ||
| M8×30 mudguard / fender washers | | M8×30 mudguard / fender washers | ||
| Fastener | | Fastener | ||
− | | | + | | (NOT GOT) |
|+ | |+ | ||
+ | | 2 | ||
| M4×20 bolt | | M4×20 bolt | ||
| Fastener | | Fastener | ||
+ | |(GOT) | ||
+ | |+ | ||
| 2 | | 2 | ||
− | |||
− | |||
| M4 nut | | M4 nut | ||
| Fastener | | Fastener | ||
+ | |(GOT) | ||
+ | |+ | ||
| 2 | | 2 | ||
− | |||
− | |||
| M4 washer | | M4 washer | ||
| Fastener | | Fastener | ||
+ | |(GOT) | ||
+ | |+ | ||
| 22 | | 22 | ||
− | |||
| M3×10 bolt | | M3×10 bolt | ||
| Fastener | | Fastener | ||
+ | |(GOT) | ||
+ | |+ | ||
| 16 | | 16 | ||
− | |||
| M3×25 bolt | | M3×25 bolt | ||
| Fastener | | Fastener | ||
− | | Or eight M3×25 bolt plus eight M3x20 bolts, see §8 steps 5 and 13 for details. | + | | Or eight M3×25 bolt plus eight M3x20 bolts, see §8 steps 5 and 13 for details. (GOT all options) |
|+ | |+ | ||
| 4 | | 4 | ||
| M3×40 bolt | | M3×40 bolt | ||
| Fastener | | Fastener | ||
+ | |(GOT) | ||
|+ | |+ | ||
| 70 | | 70 | ||
| M3 washer | | M3 washer | ||
| Fastener | | Fastener | ||
+ | |(GOT) | ||
|+ | |+ | ||
| 40 | | 40 | ||
| M3 nut | | M3 nut | ||
| Fastener | | Fastener | ||
− | | Eight optionally locknut / stop nut / nyloc | + | | Eight optionally locknut / stop nut / nyloc (GOT) |
|+ | |+ | ||
| 2 | | 2 | ||
| M3 grub screw / set screw | | M3 grub screw / set screw | ||
| Fastener | | Fastener | ||
+ | | (GOT see Matt) | ||
|+ | |+ | ||
| 3 | | 3 | ||
| 608 roller skate / inline skate / skateboard bearing | | 608 roller skate / inline skate / skateboard bearing | ||
| Bearings | | Bearings | ||
+ | | (GOT) | ||
|+ | |+ | ||
| 4 | | 4 | ||
| ballpoint pen springs | | ballpoint pen springs | ||
| Spring | | Spring | ||
+ | |(GOT - various springs at space - others available) | ||
|+ | |+ | ||
| 6 | | 6 | ||
| M8×370mm | | M8×370mm | ||
| Threaded rod | | Threaded rod | ||
− | | Three per side | + | | Three per side (GOT) |
|+ | |+ | ||
| 4 | | 4 | ||
| M8×294mm | | M8×294mm | ||
| Threaded rod | | Threaded rod | ||
− | | Front / rear | + | | Front / rear (GOT) |
|+ | |+ | ||
| 3 | | 3 | ||
| M8×440mm | | M8×440mm | ||
| Threaded rod | | Threaded rod | ||
− | | Top / bottom | + | | Top / bottom (GOT) |
|+ | |+ | ||
| 2 | | 2 | ||
| M8×210mm | | M8×210mm | ||
| Threaded rod | | Threaded rod | ||
− | | Z-leadscrew | + | | Z-leadscrew (GOT) |
|+ | |+ | ||
| 1 | | 1 | ||
| M8×50mm | | M8×50mm | ||
| Threaded rod | | Threaded rod | ||
− | | Or bolt for X idler | + | | Or bolt for X idler (GOT) |
|+ | |+ | ||
| 2 | | 2 | ||
| 8mm×420mm | | 8mm×420mm | ||
| Smooth rod | | Smooth rod | ||
+ | | (I have at home --[[User:Lwk|'RepRap' Matt]] 22:23, 10 June 2011 (BST)) | ||
|+ | |+ | ||
| 2 | | 2 | ||
| 8mm×406mm | | 8mm×406mm | ||
| Smooth rod | | Smooth rod | ||
− | | Y-bar | + | | Y-bar (I have at home --[[User:Lwk|'RepRap' Matt]] 22:23, 10 June 2011 (BST)) |
|+ | |+ | ||
| 2 | | 2 | ||
| 8mm×350mm | | 8mm×350mm | ||
| Smooth rod | | Smooth rod | ||
− | | Z-bar | + | | Z-bar (I have at home --[[User:Lwk|'RepRap' Matt]] 22:23, 10 June 2011 (BST)) |
|+ | |+ | ||
| 1 | | 1 | ||
| 225mm×225mm print top plate | | 225mm×225mm print top plate | ||
| Thick Sheet | | Thick Sheet | ||
+ | | | ||
|+ | |+ | ||
| 1 | | 1 | ||
| 140mm×225mm print bottom plate | | 140mm×225mm print bottom plate | ||
| Thick Sheet | | Thick Sheet | ||
+ | | | ||
|+ | |+ | ||
| 1 | | 1 | ||
| 840mm×5mm T5 pitch timing belt | | 840mm×5mm T5 pitch timing belt | ||
| Belt | | Belt | ||
+ | | | ||
|+ | |+ | ||
| 1 | | 1 | ||
| 1380mm×5mm T5 pitch timing belt | | 1380mm×5mm T5 pitch timing belt | ||
| Belt | | Belt | ||
+ | | | ||
|+ | |+ | ||
| 5 | | 5 | ||
| NEMA 17 bipolar stepper motor | | NEMA 17 bipolar stepper motor | ||
| Stepper | | Stepper | ||
+ | | | ||
|+ | |+ | ||
| 50 | | 50 | ||
| small cable binder / ziptie | | small cable binder / ziptie | ||
| Misc | | Misc | ||
+ | | | ||
|+ | |+ | ||
| 1 | | 1 | ||
Line 154: | Line 175: | ||
| 8mm ID spring | | 8mm ID spring | ||
| Spring | | Spring | ||
− | | If using opto endstops | + | | If using opto endstops (GOT - various springs at space - others available) |
+ | |} | ||
+ | |||
+ | We have all the M8 rod, the M8 washers, all the M3 and M4 parts. | ||
+ | |||
+ | |||
+ | === Printed Parts === | ||
+ | {| class="wikitable sortable" border="1" | ||
+ | |- | ||
+ | ! scope="col" | Quantity | ||
+ | ! scope="col" | Description | ||
+ | ! scope="col" | Type | ||
+ | ! scope="col" class="unsortable" | Comments | ||
+ | ! scope="col" class="unsortable" | Diagram | ||
+ | |- | ||
+ | | 2 || coupling || RP || || [[File:Pm-coupler.jpg|50px]] | ||
+ | |- | ||
+ | | 3 || endstop-holder || RP || Done || [[File:Pm-endstop-holder.png|50px]] | ||
+ | |- | ||
+ | | 1 || x-carriage || RP || || [[File:Pm-x-cariage.jpg|50px]] | ||
+ | |- | ||
+ | | 1 || x-end-idler || RP || || [[File:Pm-x-idler.jpg|50px]] | ||
+ | |- | ||
+ | | 1 || x-end-motor || RP || || [[File:Pm-x-motor.jpg|50px]] | ||
+ | |- | ||
+ | | 1 || y-motor-bracket || RP || Done || [[File:Pm-y-motor-bracket.jpg|50px]] | ||
+ | |- | ||
+ | | 2 || z-motor-mount || RP || || [[File:Pm-z-motor.jpg|50px]] | ||
+ | |- | ||
+ | | 4 || belt-clamp || RP || Done || [[File:Pm-belt-clamp.jpg|50px]] | ||
+ | |- | ||
+ | | 8 || bar-clamp || RP || Done || [[File:Pm-bar-clamp.jpg|50px]] | ||
+ | |- | ||
+ | | 2 || rod-clamp || RP || || [[File:Pm-rod-clamp.jpg|50px]] | ||
+ | |- | ||
+ | | 2 || pulley || RP || || [[File:Pm-pulley.jpg|50px]] | ||
+ | |- | ||
+ | | 4 || frame-vertex with foot || RP || Done 1 || [[File:Pm-frame-vertex-foot.jpg|50px]] | ||
+ | |- | ||
+ | | 2 || frame-vertex || RP || Done || [[File:Pm-frame-vertex-footless.jpg|50px]] | ||
+ | |- | ||
+ | | 12 || pla-bushing || RP-PLA || check your build file, the file makes either 4 or 12 || [[File:Pm-bushings.jpg|50px]] | ||
|} | |} | ||
+ | |||
+ | |||
+ | [[Category:Projects]] | ||
+ | [[Category:Projects (in progress)]] |
Latest revision as of 11:56, 5 February 2019
![]() |
This page is a stub. You can help by expanding it! This page is included in the list of stub pages. |
See YRS 3d Printer page
Main source of information: the Prusa page at reprap.org -- http://reprap.org/wiki/Prusa
Build instructions: File:Prusa Mendel Visual Instructions (Mininum Resolution).pdf
BOM: --
Quantity | Description | Type | Comments |
---|---|---|---|
83 | M8 nut | Fastener | Buy a 100-pack to be on the safe side. (GOT) |
93 | M8 washer | Fastener | Buy a 100-pack to be on the safe side. (GOT) |
6 | M8×30 mudguard / fender washers | Fastener | (NOT GOT) |
2 | M4×20 bolt | Fastener | (GOT) |
2 | M4 nut | Fastener | (GOT) |
2 | M4 washer | Fastener | (GOT) |
22 | M3×10 bolt | Fastener | (GOT) |
16 | M3×25 bolt | Fastener | Or eight M3×25 bolt plus eight M3x20 bolts, see §8 steps 5 and 13 for details. (GOT all options) |
4 | M3×40 bolt | Fastener | (GOT) |
70 | M3 washer | Fastener | (GOT) |
40 | M3 nut | Fastener | Eight optionally locknut / stop nut / nyloc (GOT) |
2 | M3 grub screw / set screw | Fastener | (GOT see Matt) |
3 | 608 roller skate / inline skate / skateboard bearing | Bearings | (GOT) |
4 | ballpoint pen springs | Spring | (GOT - various springs at space - others available) |
6 | M8×370mm | Threaded rod | Three per side (GOT) |
4 | M8×294mm | Threaded rod | Front / rear (GOT) |
3 | M8×440mm | Threaded rod | Top / bottom (GOT) |
2 | M8×210mm | Threaded rod | Z-leadscrew (GOT) |
1 | M8×50mm | Threaded rod | Or bolt for X idler (GOT) |
2 | 8mm×420mm | Smooth rod | (I have at home --'RepRap' Matt 22:23, 10 June 2011 (BST)) |
2 | 8mm×406mm | Smooth rod | Y-bar (I have at home --'RepRap' Matt 22:23, 10 June 2011 (BST)) |
2 | 8mm×350mm | Smooth rod | Z-bar (I have at home --'RepRap' Matt 22:23, 10 June 2011 (BST)) |
1 | 225mm×225mm print top plate | Thick Sheet | |
1 | 140mm×225mm print bottom plate | Thick Sheet | |
1 | 840mm×5mm T5 pitch timing belt | Belt | |
1 | 1380mm×5mm T5 pitch timing belt | Belt | |
5 | NEMA 17 bipolar stepper motor | Stepper | |
50 | small cable binder / ziptie | Misc | |
1 | Wade's Geared Extruder | Or any other compatible extruder | |
1 | Electronics + endstops | This can be RAMPS, Gen6, Gen3, or anything else compatible | |
3 | 30mm×10mm Optoflags | Thin Sheet | If using opto endstops |
2 | 8mm ID spring | Spring | If using opto endstops (GOT - various springs at space - others available) |
We have all the M8 rod, the M8 washers, all the M3 and M4 parts.
Printed Parts
Quantity | Description | Type | Comments | Diagram |
---|---|---|---|---|
2 | coupling | RP | 50px | |
3 | endstop-holder | RP | Done | 50px |
1 | x-carriage | RP | 50px | |
1 | x-end-idler | RP | 50px | |
1 | x-end-motor | RP | 50px | |
1 | y-motor-bracket | RP | Done | 50px |
2 | z-motor-mount | RP | 50px | |
4 | belt-clamp | RP | Done | 50px |
8 | bar-clamp | RP | Done | 50px |
2 | rod-clamp | RP | 50px | |
2 | pulley | RP | 50px | |
4 | frame-vertex with foot | RP | Done 1 | 50px |
2 | frame-vertex | RP | Done | 50px |
12 | pla-bushing | RP-PLA | check your build file, the file makes either 4 or 12 | 50px |