Difference between revisions of "Raspberry Pi Small LCD"
(Created page with "I was lucky enough to get my Raspberry Pi quite early and I've got quite a few project ideas but the first one is to create a small user interface on a cheap LCD monitor. I ...") |
|||
(5 intermediate revisions by one other user not shown) | |||
Line 1: | Line 1: | ||
I was lucky enough to get my [[Raspberry Pi]] quite early and I've got quite a few project ideas but the first one is to create a small user interface on a cheap LCD monitor. | I was lucky enough to get my [[Raspberry Pi]] quite early and I've got quite a few project ideas but the first one is to create a small user interface on a cheap LCD monitor. | ||
+ | |||
+ | |||
+ | http://www.ebay.co.uk/itm/120932197731?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649#ht_704wt_1189 | ||
I got this second-hand 5" LCD monitor from an ebay seller for £5.50 (plus £4.50 postage so a tenner in total). It's a CCTV monitor for inside a bus or taxi. I tracked it down to the manufacturer's website at http://www.lookcctv.com/show_spares.php?id=2 The unit came with a single 8-pin mini-DIN plug as the only external connector but the seller gave me a pinout diagram so I was able to work out the what went where. I decided to cut the original plug off and solder my own sockets - the alternative was to destroy a perfectly good Apple Mac 3-way serial port hub - my only other source of an 8-pin Mini-DIN socket. | I got this second-hand 5" LCD monitor from an ebay seller for £5.50 (plus £4.50 postage so a tenner in total). It's a CCTV monitor for inside a bus or taxi. I tracked it down to the manufacturer's website at http://www.lookcctv.com/show_spares.php?id=2 The unit came with a single 8-pin mini-DIN plug as the only external connector but the seller gave me a pinout diagram so I was able to work out the what went where. I decided to cut the original plug off and solder my own sockets - the alternative was to destroy a perfectly good Apple Mac 3-way serial port hub - my only other source of an 8-pin Mini-DIN socket. | ||
− | + | Photos: https://plus.google.com/photos/101627167067307203883/albums/5759903374126361649 | |
+ | |||
+ | [[File:Raspberry Pi Small LCD - 001.png|none|300px]] | ||
+ | The unit has a slightly scratched screen - no big deal. There's buttons for some menu control and audio volume and what seems to be IR remote! | ||
+ | [[File:Raspberry Pi Small LCD - 002.png|none|300px]] | ||
+ | 12v, 8W, PAL/NTSC | ||
+ | [[File:Raspberry Pi Small LCD - 003.png|none|300px]] | ||
+ | Inside, the cable breaks out to a row of 8 solder points | ||
+ | [[File:Raspberry Pi Small LCD - 004.png|none|300px]] | ||
+ | [[File:Raspberry Pi Small LCD - 005.png|none|300px]] | ||
+ | So the Mini-DIN has 8 pins but these are quite rare apart from Apple Mac serial ports. | ||
+ | [[File:Raspberry Pi Small LCD - 006.png|none|300px]] | ||
+ | Here's the pinout provided by the seller - doesn't mention the audio or problematic ground for the two video signals. | ||
+ | [[File:Raspberry Pi Small LCD - 007.png|none|300px]] | ||
+ | So I hacked off the plug and set about fitting some proper socket connectors for RCA composite video, 3.5 mm TRS audio and 6mm barrel 12v power. | ||
+ | [[File:Raspberry Pi Small LCD - 008.png|none|300px]] | ||
+ | Video socket soldering setup - heatshrink in place - the little coax video sub-cable from the LCD was tiny! | ||
+ | [[File:Raspberry Pi Small LCD - 009.png|none|300px]] | ||
+ | Using helping hands - outer braid gathered to one side - ready for tinning. | ||
+ | [[File:Raspberry Pi Small LCD - 010.png|none|300px]] | ||
+ | Fitting barrel power socket (+ve tip always!) | ||
+ | [[File:Raspberry Pi Small LCD - 011.png|none|300px]] | ||
+ | Success with the power! Using a bench power supply. | ||
+ | [[File:Raspberry Pi Small LCD - 012.png|none|300px]] | ||
+ | The LCD's own menus can be navigated with the buttons - took some getting used to. | ||
+ | [[File:Raspberry Pi Small LCD - 013.png|none|300px]] | ||
+ | After a few failed attempts I finally worked out the wiring for the video and achieved my goal - the Pi Debian login presented on my £10 LCD! | ||
+ | [[File:Raspberry Pi Small LCD - 014.png|none|300px]] | ||
+ | And with the Pi logo! Here the LCD is auto selecting the NTSC signal. Nice feature. | ||
+ | [[File:Raspberry Pi Small LCD - 015.png|none|300px]] | ||
+ | My hand in shot for scale. | ||
+ | [[File:Raspberry Pi Small LCD - 016.png|none|300px]] | ||
+ | And X in all its glory! It's obviously too small to use the console or the desktop as is and that's fine as my plans for this are as a custom user interface with quite large text and buttons. | ||
+ | [[File:Raspberry Pi Small LCD - 017.png|none|300px]] | ||
+ | OK, all done - three usable sockets instead of one unusable non-standard plug! There's no photos of the audio :D but I can assure you it works well. Only mono but I don't think that matters on the tiny piezoelectric speaker! | ||
+ | [[Category:Tools_and_Equipment]] |
Latest revision as of 13:57, 12 December 2014
I was lucky enough to get my Raspberry Pi quite early and I've got quite a few project ideas but the first one is to create a small user interface on a cheap LCD monitor.
I got this second-hand 5" LCD monitor from an ebay seller for £5.50 (plus £4.50 postage so a tenner in total). It's a CCTV monitor for inside a bus or taxi. I tracked it down to the manufacturer's website at http://www.lookcctv.com/show_spares.php?id=2 The unit came with a single 8-pin mini-DIN plug as the only external connector but the seller gave me a pinout diagram so I was able to work out the what went where. I decided to cut the original plug off and solder my own sockets - the alternative was to destroy a perfectly good Apple Mac 3-way serial port hub - my only other source of an 8-pin Mini-DIN socket.
Photos: https://plus.google.com/photos/101627167067307203883/albums/5759903374126361649
The unit has a slightly scratched screen - no big deal. There's buttons for some menu control and audio volume and what seems to be IR remote!
12v, 8W, PAL/NTSC
Inside, the cable breaks out to a row of 8 solder points
So the Mini-DIN has 8 pins but these are quite rare apart from Apple Mac serial ports.
Here's the pinout provided by the seller - doesn't mention the audio or problematic ground for the two video signals.
So I hacked off the plug and set about fitting some proper socket connectors for RCA composite video, 3.5 mm TRS audio and 6mm barrel 12v power.
Video socket soldering setup - heatshrink in place - the little coax video sub-cable from the LCD was tiny!
Using helping hands - outer braid gathered to one side - ready for tinning.
Fitting barrel power socket (+ve tip always!)
Success with the power! Using a bench power supply.
The LCD's own menus can be navigated with the buttons - took some getting used to.
After a few failed attempts I finally worked out the wiring for the video and achieved my goal - the Pi Debian login presented on my £10 LCD!
And with the Pi logo! Here the LCD is auto selecting the NTSC signal. Nice feature.
My hand in shot for scale.
And X in all its glory! It's obviously too small to use the console or the desktop as is and that's fine as my plans for this are as a custom user interface with quite large text and buttons.
OK, all done - three usable sockets instead of one unusable non-standard plug! There's no photos of the audio :D but I can assure you it works well. Only mono but I don't think that matters on the tiny piezoelectric speaker!