BarBot/Components/CocktailUmbrellaGripper: Difference between revisions
< BarBot | Components
Iandickinson (talk | contribs) Created page with "== Cocktail Umbrella Gripper == ===General Description=== The Cocktail Umbrella Gripper is manually loaded with an pre-opened cocktail umbrella. Once the drink has been prepa..." |
m Danspencer101 moved page Project:BarBot/Components/CocktailUmbrellaGripper to BarBot/Components/CocktailUmbrellaGripper |
||
| (5 intermediate revisions by one other user not shown) | |||
| Line 2: | Line 2: | ||
===General Description=== | ===General Description=== | ||
The Cocktail Umbrella Gripper is manually loaded with | The Cocktail Umbrella Gripper is manually loaded with a single pre-opened cocktail umbrella. Once the drink has been prepared a solenoid (12V, 2A, 20N, 10mm) is used to automatically drop the umbrella into the drink before presentation to the patiently waiting customer. | ||
[[File:20140627 160633 resized.jpg|none|600px|BarBot Cocktail Umbrella Gripper]] | [[File:20140627 160633 resized.jpg|none|600px|BarBot Cocktail Umbrella Gripper]] | ||
| Line 19: | Line 19: | ||
* Ground | * Ground | ||
* RELEASE | * RELEASE | ||
===Power=== | |||
+12V, 2A | |||
===Bling=== | ===Bling=== | ||
None at all! | None at all! | ||
Latest revision as of 11:49, 5 February 2019
Cocktail Umbrella Gripper
General Description
The Cocktail Umbrella Gripper is manually loaded with a single pre-opened cocktail umbrella. Once the drink has been prepared a solenoid (12V, 2A, 20N, 10mm) is used to automatically drop the umbrella into the drink before presentation to the patiently waiting customer.
Notes:
- I think we need a cherry (or similar) attached to the umbrella to add some weight, otherwise the umbrella can fall out of the glass. (If so, the cherry conveyor could be re-purposed for olives?)
Mounting & hardware
A couple of 4mm holes are provided for mounting the mechanism. It needs to be mounted such that the umbrella falls and hooks onto the side the glass.
Logical
To be confirmed. May use a L298N dual H-bridge (a bit over the top, but in common with other mechanisms).
Connections
- +12V
- Ground
- RELEASE
Power
+12V, 2A
Bling
None at all!