Dymo Labelwriter: Difference between revisions

From Nottinghack Wiki
Jump to navigation Jump to search
No edit summary
 
Line 21: Line 21:
The design program allows for import of logos and graphics, which can then be used for single, or runs (numbered, or from a data list, etc.) of labels.
The design program allows for import of logos and graphics, which can then be used for single, or runs (numbered, or from a data list, etc.) of labels.


Although the proprietary labels are expensive (about 3p each) the quality is good for a 'thermal paper' label, and the cost is considerably less than the labels used in the P-Touch labeller.
Although the proprietary labels are expensive (about 3p each) the quality is good for a 'thermal paper' label, and the cost is considerably less than the labels used in the [[Brother P-Touch]] labeller.


[[Category:Tools_and_Equipment]]
[[Category:Printers and scanners]]

Latest revision as of 09:51, 4 April 2019

Dymo Labelwriter
Manufacturer Dymo
Model Model 400 Label Printer
AKA {{{aka}}}
Obtained
Location Blue Room
Team Tools
Induction Required No
Booking {{{booking}}}
Status Defunct
Tools:   all pageslistPower ToolsBroken tools     {{}}

There is a model 400 label printer in the Blue Room.

The latest driver program is installed on the Windows Partition of Quorra.

To use, simply plug the printer into a USB port on the PC, connect the power, and run the program (on the desktop).

The supplied labels are 36mm x 89mm and are suitable for many labelling tasks in the Hackspace. An example is stuck to the front ot the printer. Other sizes of label are available - think £15-20 per box (2 rolls) of about 500 labels.

The design program allows for import of logos and graphics, which can then be used for single, or runs (numbered, or from a data list, etc.) of labels.

Although the proprietary labels are expensive (about 3p each) the quality is good for a 'thermal paper' label, and the cost is considerably less than the labels used in the Brother P-Touch labeller.