Freestyle Skateboard Skidplates

Freestyle Skateboard Skidplates
[[{{{image}}}|border|frameless|220px|center]]
Primary Contact	Michael Erskine
Created	{{{created}}}
Completed	{{{completeddate}}}
Dormant	{{{dormantdate}}}
Version	{{{version}}}
Members	{{{members}}}
Manufacturer	{{{manufacturer}}}
Model	{{{model}}}
Location	[[{{{location}}}]]
GitHub / Repo	{{{repo}}}
Status	{{{status}}}
Type	Undefined
Live Status	{{{livestatus}}}
QR code

Freestyle skateboards typically have skidplates (a.k.a. "tail-savers" or "tail-skids") to reduce the frictional wear on the underside of the deck nose and tail. Avoiding wear on the nose and tail is important for freestyle boards as there are many tricks that excert a lot of force on the ends of the board which, if worn down too far, will delaminate and ruin the deck. Freestyle skidplates are typically plastic or wood and are bolted or screwed to the deck. Plastic is preferred as it offers less friction. There are very few commercial outlets for freestyle skidplates, mostly from specialist skate shops in the USA and Germany.

• 
  Various Freestyle Skateboard Tailskids

Goals

• suitable for use (durable)
• cheap
• easy to make
• consistent quality
• sustainable

We (i.e. the UK Freestyle Skateboarding community) are looking for an alternative, convenient source of consumable skidplates. Resistance to wear needs to be balanced with cost and convenience. Cost is of course a product of both materials price and manufacturing labour time. In this regard, the two initial prototypes currently produced are probably the most expensive skidplates every made! As we are all aware, one-off prototypes are rarely representative of a commercially viable product!

A further goal, which is important to me in the International Freestyle Skateboarding Community, is to not unduly affect the revenue streams of other grass-roots freestyle skate companies. It is for this reason that I promise to only ever produce these on a not-for-profit basis, perhaps as sponsorship only.

Balance: -

• buying in high quality engineering plastics that can be quickly manufactured into skidplates
• recycling readily-available HDPE into stock that can be "reasonably" quickly manufactured into skidplates

Prototypes

Materials: -

Material	Info	Laser-safe	Machinable	Price	Testing
HDPE	plastipedia wp	Yes but "melty"	Yes but slightly "chewy"	Low	Underway
Polypropylene	wp	Yes but "melty"	Yes (needs testing)	Unknown	None
Acetal (Delrin)	plastipedia wp	Yes (excellent)	Yes (excellent)	Fairly High	Underway
LDPE	wp	Unknown	Unknown	Unknown	None
PTFE (Teflon)	wp	Unknown	Yes (excellent)	Crazy Expensive	None
Nylon 66	plastipedia wp	Unknown	Yes (excellent)	Unknown	None

"Milky-Milky" Recycled HDPE prototype 1

• Recycled from plastic milk bottles - See HDPE Processing
• Rendered in toaster oven at 230 degrees C
• Machined plate on Bridgeport to 8mm
• outline and fixing drill holes etched on laser cutter
• outline cut on bandsaw
• fixing holes drilled on pillar drill
• bevel (yet to be formed)

• 
  Almost Finished Prototype 1
• 
  Fitted for testing, etched with logo

"Natural-D" Delrin prototype 1

• engineering 8mm Delrin plate offcut
• laser cut outline and drill holes at 7mm/sec
• re-drill and countersink of bolt holes on pillar drill
• bevelled edge made on disk sander
• testing in progress - going well!

• 
  Testing in progress
• 
  After a couple of weeks of testing

• 
  HDPE and Delrin prototypes etched with logos

Industrial Processes

• Materials sourcing (per material type)
  • HDPE "Milky-Milky" type - See HDPE Processing
    • Collecting/washing/processing HDPE milk bottles
    • Melting and laminating into "slugs", pressing into molds
    • milling slugs into stock 8mm plates
  • Delrin "Natural-D" type
    • Engineering plastics suppliers (eBay, etc.)
• Cutting (per material type)
  • Delrin - Blackfin A0 laser cutter 5mm/s at 60% power (58% corner power)
  • HDPE - etched outline on surface with laser cutter then bandsaw and disc-sander
• Finishing
  • 45 degree bevel on back edge, 4mm depth, various methods
  • mounting holes - drill press (not necessary for Delrin)
  • countersink holes - hand drill by eye 50% depth
  • mounting hardware

Current Skidplate Sources

eBay search terms: -

• Skateboarding category
• NOS Powell Tailbone
• skid plate in Skateboarding
• tailsaver, tail-saver, tail saver, tailbone, tail-bone, tail bone, tailskid, tail-skid, tail skid, skidplate, skid-plate skid plate

International skate shops

• http://www.davertskate.com/old-school-parts.html
• SoCal skate shop
• Never Enough Skates