Stayer: Difference between revisions
No edit summary |
minor |
||
| Line 12: | Line 12: | ||
}} | }} | ||
Stayer cutoff ( or 'cold cut chopsaw' | '''Stayer''' cutoff saw (or 'cold cut chopsaw'). Usually on the metalwork bench, this is a ''slow speed'' circular saw for cutting metal. | ||
Intended for cutting ''with a coolant supply'' for which there is a pump - to be commissioned and checked. | Intended for cutting ''with a coolant supply'' for which there is a pump - to be commissioned and checked. | ||
Revision as of 10:35, 22 March 2019
| Stayer | |
|---|---|
 | |
| Manufacturer | Stayer |
| Model | TF84 |
| Location | Metalworking Area |
| Team | Metalworking |
| Induction Required | No |
| Tools: all pages • list • Power Tools • Broken tools {{}} | |
Stayer cutoff saw (or 'cold cut chopsaw'). Usually on the metalwork bench, this is a slow speed circular saw for cutting metal.
Intended for cutting with a coolant supply for which there is a pump - to be commissioned and checked.
The blade is made of High Speed Steel, and these are cut and sharpened to order by L M Cutting Tools
Original blade sharpened, and new blade supplied 28/10/2016
Issues
The electrical trigger control (or motor) is intermittent in operation and needs attention.
When the metalworking area is completely laid out, there may be space for this saw to be permanently sited on a bench and we can fill the reservoir with cutting fluid. Until then, it cuts dry, or needs manual feeding of fluid (as appropriate for the material being cut).