Michael's MAME Machine: Difference between revisions
No edit summary |
No edit summary |
||
| Line 6: | Line 6: | ||
New screen - huge CRT VGA monitor with some screenburn and limited resolution | New screen - huge CRT VGA monitor with some screenburn and limited resolution | ||
Update 08/10/2012 | |||
Performance woes with SDLMAME in fullscreen. | |||
* tried a fresh PC with oodles of CPU/RAM - same result! | |||
* need to obtain and drop back to ancient xmame version | |||
* find PC case for new PC | |||
---- | ---- | ||
Revision as of 10:41, 8 October 2012
Home arcade machine revamp
Update 01/10/2012
New screen - huge CRT VGA monitor with some screenburn and limited resolution
Update 08/10/2012
Performance woes with SDLMAME in fullscreen.
- tried a fresh PC with oodles of CPU/RAM - same result!
- need to obtain and drop back to ancient xmame version
- find PC case for new PC
The development pages from some years back: http://www.tecspy.com/arcade
- recover games (and most importantly, the high scores) from the dead laptop
- HDD totally dead :( Need to obtain ROM sets again
- mamed front end http://phulshof.home.xs4all.nl/mame.html - compile and tweak
- better linux distro base - have kubuntu 7.10 - want Knoppix 6
- rewire controls matrix - should take a couple of hours
- Noisy fan on PC - heatpipe? ideas please
- Priority! Gauntlet rev 14 http://www.rom-world.com/file.php?id=23575
- recover games (and most importantly, the high scores) from the dead laptop
Update: 22/07/2011
I have now replaced the replacement PC! Seems to work mostly but some full system freezes have happened :(
MAMED has now been built and it works! After all these years the SDL libs are still compatible.
The keyboard controller seems to work!
- more button wiring to do
- more tweaking of mamed config
- more USB PlayStation2 contollers on the way
TODO: Michael Erskine 09:06, 7 December 2011 (EST)
- replace LAN cable run from members room
- minimal Xorg server installation with BlackBox window manager or equivalent
- replace GDM with straight startx as low-permissions user
- replace XFCE with plain X init straight into mamed front end
- screen bezel fitting
- mark screen geometry when bezel fitted and screen in position
- router work on sizing and chamfer
- blackout tape and foam padding
Update: 05/04/2012
The machine is now in the studio (again!) and we have a working PC with a recent Xubuntu, functional mame install and all three DVDs of ROMs installed. The next stage is to get the mamed front-end starting automatically as an unprivileged user.
- Where I would previously have just used inittab, Ubuntu now uses upstart: -
- so we could have xdm (or equivalent) auto-login as the mame user and have their xinit launch mamed as the only X client
- create user and give access to all the files required