Dymo Labelwriter
| Dymo Labelwriter | |
|---|---|
 | |
| Manufacturer | Dymo |
| Model | Model 400 Label Printer |
| Location | Blue Room |
| Team | Tools |
| Induction Required | No |
| Tools: all pages • list • Power Tools • Broken tools {{}} | |
There is a model 400 label printer in the Blue room.
The latest driver program is installed on the Windows Partition of Quorra.
To use, simply plug the printer into a USB port on the PC, connect the power, and run the program (on the desktop).
The supplied labels are 36mm x 89mm and are suitable for many labelling tasks in the Hackspace. An example is stuck to the front ot the printer. Other sizes of label are available - think £15-20 per box (2 rolls) of about 500 labels.
The design program allows for import of logos and graphics, which can then be used for single, or runs (numbered, or from a data list, etc.) of labels.
Although the proprietary labels are expensive (about 3p each) the quality is good for a 'thermal paper' label, and the cost is considerably less than the labels used in the P-Touch labeller.