Benchtop Bandsaw
| Benchtop Bandsaw (defunct) | |
|---|---|
 | |
| Manufacturer | Schneider Germany |
| Model | SCH190 |
| Obtained | A very long time ago |
| Location | In Storage |
| Team | Tools |
| Induction Required | No |
| Status | Defunct |
| Tools: all pages • list • Power Tools • Broken tools {{}} | |
As of 2019 this tool has been replaced with a newer, more powerful model.
This tool should not have been used to cut metal as it was fitted with a wood cutting blade.
The bench-top bandsaw was one of the most well-used power tools that we've had in the Hackspace. For this reason a proposal to invest in a better (more powerful, less prone to blade breakage) one has been put forward, and a pledge drive started to gauge interest and raise funds for this. See Fox Bandsaw.
The yellow bandsaw was a Schneider model SCH190, with 250W motor running at 1500RPM.
So it is not a hugely powerful device - do try not to force it to cut too quickly, as the narrow blades (which are useful for curve-cutting) are easily worn-down and broken.
Replacement blades are 56½" long, and are available from Toolstation
76022 56½ x 1/4" 10tpi
44839 56½ x 1/4" 14tpi
Wider blades, for straight cutting, which may also fit (not tested) are:
12103 Bandsaw Blade 56½ x 3/8 6tpi
23015 Bandsaw Blade 56½ x 1/2 6tpi
Other suppliers may keep equivalent blades, for example Silverline brand:
633924 56½ x 1/4" 6tpi
868739 56½ x 1/4" 10tpi
675295 56½ x 1/4" 14tpi
