Difference between revisions of "BarBot/Makers"
< BarBot
Jump to navigation
Jump to search
(Created page with "== Who's doing what == * Michael E: [[{{FULLPAGENAME}}/Pinch value|Investigating servo pinch valve]] ** this will be timed rather than measured so calibration of each valve i...") |
m (Danspencer101 moved page Project:BarBot/Makers to BarBot/Makers) |
||
| (3 intermediate revisions by one other user not shown) | |||
| Line 23: | Line 23: | ||
** continuous rotation servos or steppers - can use single stepper and gearbox | ** continuous rotation servos or steppers - can use single stepper and gearbox | ||
* spills and mess, hygiene and cleanup | * spills and mess, hygiene and cleanup | ||
| − | |||
I now have 2 types of 6mm tubing: cheap plastic from wilkos and some more expensive silicone tubing from the Range -- [[User:Msemtd|Michael Erskine]] 1 April 2014 | I now have 2 types of 6mm tubing: cheap plastic from wilkos and some more expensive silicone tubing from the Range -- [[User:Msemtd|Michael Erskine]] 1 April 2014 | ||
| Line 29: | Line 28: | ||
* http://www.ebay.co.uk/itm/261374586967?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649 | * http://www.ebay.co.uk/itm/261374586967?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649 | ||
* http://www.ebay.co.uk/itm/261374586967 | * http://www.ebay.co.uk/itm/261374586967 | ||
| + | |||
| + | Fizzy drink tap arrived and looks good - I shall bring it to Hackspace tomorrow along with a 2l bottle of cola -- [[User:Msemtd|Michael Erskine]] 13 April 2014 | ||
| + | |||
| + | I won an eBay auction for 6 optics! | ||
| + | |||
| + | * Michael E: co2 pressurised fizzy system -- [[User:Msemtd|Michael Erskine]] 08:24, 30 April 2014 (EST) | ||
| + | ** I have a good design that has been approved by professionals! | ||
| + | ** I have ordered more taps and a low-pressure regulator from eBay | ||
| + | ** we have suitable low-pressure tubing at the space | ||
Latest revision as of 11:49, 5 February 2019
Who's doing what
- Michael E: Investigating servo pinch valve
- this will be timed rather than measured so calibration of each valve is required per ingredient
- one valve per ingredient bottle
- Tower Pro SG90 9g Servo - have one for prototyping - DX bulk order - cheap
- laser cut mech
- 6mm soft silicon tubing - check HS consumables -
- find reliable local supplier
- for long lengths we don't need the nice stuff - just cheap plastic tubing is enough - need connectors though. http://www.wilko.com/fish/wilko-aquarium-airline/invt/0121966?VBMST=aquarium
- pets at home (expensive but local)
- Arduino servo control shield and code
- bottle interface
- cork/bung with hole - cheap pourers with silicone sleeve
- bottle is inverted
- bottle needs holder of course.
- Bottle holder: hose clamps/rapstraps, presentation aspects, changeability,
- Michael: investigate peristaltic pumps
- can be as cheap as pinch valves
- very controllable
- https://www.thingiverse.com/tag:peristaltic
- lasercut parts
- continuous rotation servos or steppers - can use single stepper and gearbox
- spills and mess, hygiene and cleanup
I now have 2 types of 6mm tubing: cheap plastic from wilkos and some more expensive silicone tubing from the Range -- Michael Erskine 1 April 2014
I have ordered a cheap 2l bottle fizzy drink tap from a HK ebay seller - these might be a cheap answer for carbonated mixers -- Michael Erskine 1 April 2014
- http://www.ebay.co.uk/itm/261374586967?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
- http://www.ebay.co.uk/itm/261374586967
Fizzy drink tap arrived and looks good - I shall bring it to Hackspace tomorrow along with a 2l bottle of cola -- Michael Erskine 13 April 2014
I won an eBay auction for 6 optics!
- Michael E: co2 pressurised fizzy system -- Michael Erskine 08:24, 30 April 2014 (EST)
- I have a good design that has been approved by professionals!
- I have ordered more taps and a low-pressure regulator from eBay
- we have suitable low-pressure tubing at the space