Difference between revisions of "Cordless Drills"
Jump to navigation
Jump to search
Note: Fully charging a 4Ah battery can take up to 2 hours. This is not because the chargers are slow, but because the batteries have a high capacity.
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | August 2014 | + | {{Tool |
| + | |image=File:Tool Cordless Drills.jpg | ||
| + | |manufacturer=Various | ||
| + | |model=Various | ||
| + | |obtained=Purchased by Hackspace | ||
| + | |obtaineddate=August 2014 | ||
| + | |location=Workshop | ||
| + | |team= | ||
| + | |induction=No | ||
| + | |defunct= | ||
| + | |defunctdate= | ||
| + | }} | ||
| + | The cordless drills are available for Project & Infrastructure work in the Hackspace. There is a Storage rack for the drills and chargers in the workshop. | ||
| − | + | ==Heavy Combi Drills== | |
| − | + | 2 Bosch GSB18V-LI Professional drills featuring: | |
| + | * 18V 4ampHour Lithium-Ion Coolpack battery | ||
| + | * Fan cooled motor | ||
| + | * 2 gearbox speeds, reversible. | ||
| + | * Motor speed control through the trigger. | ||
| + | * White LED work light. | ||
| + | * 13mm Auto lock chuck | ||
| + | * Electric brake | ||
| + | * All metal gearbox | ||
| + | * Hammer action (turned on and off with a ring separate from the driver torque-limit ring) | ||
| − | + | ==Handy Combi Drills== | |
| − | + | 2 Bosch GSB18-2-LI Professional drills featuring: | |
| − | + | * 18V 3ampHour Lithium-Ion Coolpack battery | |
| − | + | * Fan cooled motor | |
| − | + | * 2 gearbox speeds, reversible. | |
| − | * | + | * Motor speed control through the trigger. |
| − | + | * 10mm Auto lock chuck | |
| − | + | * Electric brake | |
| − | + | * All metal gearbox | |
| − | + | * Hammer action (turned on and off with a ring separate from the driver torque-limit ring) | |
| − | + | ==Drill Driver== | |
| − | * | + | DeWalt DCD710 featuring: |
| − | + | * 10.8V 1.5ampHour Lithium-Ion battery | |
| − | + | * 2-Speed Variable & Reverse gearbox | |
| − | * | + | * 10mm Keyless Chuck |
| − | * | + | * 15 Torque Settings |
| − | + | * Electric Brake | |
| − | |||
| − | |||
| − | + | ==Impact Driver== | |
| + | DeWalt DCF815 | ||
| + | * 10.8V 1.5ampHour Lithium-Ion battery | ||
| + | * Single-Speed Variable & Reverse | ||
| + | * ¼" Hex Tool Holder | ||
| + | * 107Nm Sustained Torque | ||
| + | * All-Metal Gearbox | ||
| − | + | Bits for used in the Impact Driver should be the longer type with a securing notch. The knurled ring surrounding the bit holder is pushed forwards to release the bits (they are inserted simply by pushing them into place). | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | + | ==Charging== | |
| − | + | The charger for the DeWalt Drill and Driver features battery temperature detection, and pauses charging if the battery pack is too warm or cold. | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | + | {{note|Fully charging a 4Ah battery can take up to 2 hours. This is not because the chargers are slow, but because the batteries have a high capacity.}} | |
| − | |||
[[Category:Tools and Equipment]] | [[Category:Tools and Equipment]] | ||
Latest revision as of 23:09, 27 February 2019
| Cordless Drills | |
|---|---|
 | |
| Manufacturer | Various |
| Model | Various |
| Obtained | Purchased by Hackspace (August 2014) |
| Location | Workshop |
| Team | Tools |
| Induction Required | No |
| Tools: all pages • list • Power Tools • Broken tools {{}} | |
The cordless drills are available for Project & Infrastructure work in the Hackspace. There is a Storage rack for the drills and chargers in the workshop.
Heavy Combi Drills
2 Bosch GSB18V-LI Professional drills featuring:
- 18V 4ampHour Lithium-Ion Coolpack battery
- Fan cooled motor
- 2 gearbox speeds, reversible.
- Motor speed control through the trigger.
- White LED work light.
- 13mm Auto lock chuck
- Electric brake
- All metal gearbox
- Hammer action (turned on and off with a ring separate from the driver torque-limit ring)
Handy Combi Drills
2 Bosch GSB18-2-LI Professional drills featuring:
- 18V 3ampHour Lithium-Ion Coolpack battery
- Fan cooled motor
- 2 gearbox speeds, reversible.
- Motor speed control through the trigger.
- 10mm Auto lock chuck
- Electric brake
- All metal gearbox
- Hammer action (turned on and off with a ring separate from the driver torque-limit ring)
Drill Driver
DeWalt DCD710 featuring:
- 10.8V 1.5ampHour Lithium-Ion battery
- 2-Speed Variable & Reverse gearbox
- 10mm Keyless Chuck
- 15 Torque Settings
- Electric Brake
Impact Driver
DeWalt DCF815
- 10.8V 1.5ampHour Lithium-Ion battery
- Single-Speed Variable & Reverse
- ¼" Hex Tool Holder
- 107Nm Sustained Torque
- All-Metal Gearbox
Bits for used in the Impact Driver should be the longer type with a securing notch. The knurled ring surrounding the bit holder is pushed forwards to release the bits (they are inserted simply by pushing them into place).
Charging
The charger for the DeWalt Drill and Driver features battery temperature detection, and pauses charging if the battery pack is too warm or cold.
Note: Fully charging a 4Ah battery can take up to 2 hours. This is not because the chargers are slow, but because the batteries have a high capacity.