Difference between revisions of "Stayer"
Jump to navigation
Jump to search
(→Issues: remove intermittent issue. Seems fine) |
|||
(3 intermediate revisions by 2 users not shown) | |||
Line 1: | Line 1: | ||
− | {{ | + | {{Tool |
+ | |image=File:Tool Stayer Chopsaw.jpeg | ||
+ | |manufacturer=Stayer | ||
+ | |model=TF84 | ||
+ | |obtained= | ||
+ | |obtaineddate= | ||
+ | |location=Metalworking Area | ||
+ | |team=Metalworking | ||
+ | |induction=No | ||
+ | |defunct= | ||
+ | |defunctdate= | ||
+ | }} | ||
− | Stayer cutoff ( or 'cold cut chopsaw' | + | '''Stayer''' cutoff saw (or 'cold cut chopsaw'). Usually on the metalwork bench, this is a ''slow speed'' circular saw for cutting metal. |
Intended for cutting ''with a coolant supply'' for which there is a pump - to be commissioned and checked. | Intended for cutting ''with a coolant supply'' for which there is a pump - to be commissioned and checked. | ||
Line 8: | Line 19: | ||
Original blade sharpened, and new blade supplied 28/10/2016 | Original blade sharpened, and new blade supplied 28/10/2016 | ||
− | |||
− | |||
− | |||
− | |||
== Issues == | == Issues == | ||
− | |||
− | |||
When the metalworking area is completely laid out, there may be space for this saw to be permanently sited on a bench and we can fill the reservoir with cutting fluid. Until then, it cuts dry, or needs manual feeding of fluid (as appropriate for the material being cut). | When the metalworking area is completely laid out, there may be space for this saw to be permanently sited on a bench and we can fill the reservoir with cutting fluid. Until then, it cuts dry, or needs manual feeding of fluid (as appropriate for the material being cut). |
Latest revision as of 14:26, 22 March 2019
Stayer | |
---|---|
Manufacturer | Stayer |
Model | TF84 |
Location | Metalworking Area |
Team | Metalworking |
Induction Required | No |
Tools: all pages • list • Power Tools • Broken tools {{}} |
Stayer cutoff saw (or 'cold cut chopsaw'). Usually on the metalwork bench, this is a slow speed circular saw for cutting metal.
Intended for cutting with a coolant supply for which there is a pump - to be commissioned and checked.
The blade is made of High Speed Steel, and these are cut and sharpened to order by L M Cutting Tools
Original blade sharpened, and new blade supplied 28/10/2016
Issues
When the metalworking area is completely laid out, there may be space for this saw to be permanently sited on a bench and we can fill the reservoir with cutting fluid. Until then, it cuts dry, or needs manual feeding of fluid (as appropriate for the material being cut).