Laser Area

Laser Area
Intended Use	Workshop area devoted to the Laser Cutter
Manufacturer	{{{manufacturer}}}
Model	{{{model}}}
Team	Laser
Floor	Upstairs
Area	[[{{{parentlocation}}}]]
Map
Locations:   all pages                 {{}}

The Laser Area is where the Laser cutter is located with its associated equipment and storage. It is accessed via the Workshop. Information about this area is included on the machine's page.

Tools and equipment

The Laser Cutter, that requires induction and booking.

Cleaning and maintenance

Always leave the area as you would like to find it. Build time into your schedule for cleaning up:

• Empty the bin if it's full. The Bizspace bins are located in Roden Street. There's no competition to see how high you can pile the rubbish! Replacement bin liners can be found in the Toilets, on the shelf between the cubicles and the window.

• Carefully consider whether an off-cut is really useful to another member. Please don't use the scrap trays as an extension of the bin. Don't leave any work or scrap in the machine. Useful scrap is stored on the rack next to the machine. Waste scrap should be put in the bin. When the bin is full remove and tie bag, Roden House dump in skips, see Waste and Recycling Initiative.

• Tidy up after yourself! Please clean up a bit more mess than you made! If you drop something on the floor, please pick it up. Dirty cups should go in the dish washer, drinks cans and pizza boxes in the bin and put tools back were they belong.

• Please pick up all off-cuts / loose parts from the bed, so it's ready for the next user.

• Consider volunteering to help a hackspace team and contributing to the running of the hackspace.

Future plans

The Electronics Area that was behind the Laser Cutter has been moved downstairs. The Laser Area may be extend into this.