Blue Room

From Nottinghack Wiki
Revision as of 10:15, 12 December 2024 by Bauhaus1919 (talk | contribs) (→‎Tools and equipment)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Blue Room
Intended Use Clean, non-workshop area.
Manufacturer {{{manufacturer}}}
Model {{{model}}}
Team Infrastructure
Floor Downstairs
Area [[{{{parentlocation}}}]]
Map
Locations:   all pages                 {{}}


The Blue Room is a general purpose clean working area. It is used for meetings, events, co-working and printing. The room isn't looked after by any team in particular but is kept clean by the members that use it.

Tools and equipment

The Blue Room is equipped with a very large display and large table and a sink. There are cables to connect to the monitor with hanging down to the centre of the big table.

On the shelves there are a large number of monitors which can be used as second monitors to your laptop. There are keyboards and mice in the Coworking Drawers.

You will also find Printers, Scanners and two general purpose co-working desktop computers in here.

A list of tools in this area with wiki pages is available here: Tools and Equipment in Blue Room


Safety

The tools in this area are generally considered quite safe. However, your safety is your own responsibility.

Note Note: Heaters should not be plugged into the sockets on the desk in the centre of the room.

Availability

This area does not require booking and can not be booked.

Materials and consumables

There are printing materials on the shelving rack in the Blue Room. There's a donations pot that can be used to help replace resources used.

Cleaning and maintenance

Always leave the area as you would like to find it. Build time into your schedule for cleaning up.

Problems and issues

If there is a problem in the Blue Room, contact the Infrastructure team. If a tool is broken or damaged report it to the team.

Project idea: Drawer handles

There are a set of drawers which hold a few useful tools. The original handles were broken and battered and so User:Asj and User:Shane replaced them. This is a fun, easy project that can be done with scrap wood using hand tools or power tools. You might even want to 3D print or go wild and make some metal ones.

Feel free to replace these - but also don't get too precious. Someone else will replace yours soon (hopefully)!

Light Control

Lighting is handled by the console near the exit door. There's also a light switch which will toggle all of the lights.


Sub-Locations

Contained within this area are sub locations. A full list of these can be found here: Sub-Locations of Blue Room

Locations
Upstairs Comfy AreaStudioMembers StorageTextiles WorkshopKitchenToiletsWorkshopDusty AreaMetalworking AreaSpray BoothLaser AreaCNC AreaScreen Printing
Downstairs 3D Printer AreaElectronics AreaBlue RoomTeam StorageMetalworking DownstairsMembers Storage DownstairsClassroomBike AreaMain CorridorCNC Corridor
Changes in [[:Category:]]
No changes during the given period match these criteria.