Spray Booth

Spray Booth
Intended Use	For Spray painting and other activities involving harmful fumes
Manufacturer	{{{manufacturer}}}
Model	{{{model}}}
Team	Infrastructure
Floor	Upstairs
Area	[[{{{parentlocation}}}]]
Map
Locations:   all pages                 {{}}

The spray booth is used for painting and working with substances that emit hazardous fumes. The spray booth is fitted with an extraction fan that helps to remove harmful fumes and trap airborne paint particles.

Tools and equipment

In the spray booth you will find a table for resting work upon & hooks that can be used to suspend projects from the ceiling.

Important notes

Tools in this area are contaminated with paint and should not be used in the other areas without thorough cleaning. In particular the Workshop & Dusty Area as the paint can stain other projects.

Safety

Ensure that the extraction fan is switched on and remains on for the duration of your time in the booth. The switch is labeled and is located just outside the door at head height.

• Protect your lungs! Wear suitable PPE, such as a respirator or dust mask, and eye protection.
• Keep the door closed whilst spraying.
• Spray away from the door, towards the back wall of the booth.
• Do not spend too long in the spray booth. Take regular breaks to let harmful fumes be extracted

Availability

This area does not require booking and can not be booked.

If you plan to leave something drying in the booth and would prefer it not to be disturbed, consider posting on the Google Group and placing a note on the door. Bear in mind that this is never a guarantee that someone else won't use the area, it cannot be booked out for exclusive use.

If someone else's project is already in the Booth when you come to use it, take reasonable precautions to avoid getting paint on their project.

Please don't leave your projects in the Booth for longer than absolutely required.

Materials and consumables

Immediately next to the spray booth is the Solvent cupboard.

Cleaning and maintenance

Always leave the area as you would like to find it. Build time into your schedule for cleaning up.

Problems and issues

If there is a problem with the Spray Booth contact the Infrastructure team.

Operation

The photo shows the spray booth plugged into an extension behind the laser cutter. As this is not convenient for access, it is now connected to an extension accessible from the Electronics Bay.

The power is fed through a RCD safety cutout. One button turns on the power, the other trips it off.

The category 'Category:Sub-Location of Spray Booth' does not exist; create category or remove Template:Paragraph Sub Location.

Project History

Spray Booth
[[{{{image}}}|border|frameless|220px|center]]
Primary Contact	Infrastructure
Created	08/07/2013
Completed	{{{completeddate}}}
Dormant	{{{dormantdate}}}
Version	{{{version}}}
Members	{{{members}}}
Manufacturer	{{{manufacturer}}}
Model	{{{model}}}
Location	[[{{{location}}}]]
GitHub / Repo	{{{repo}}}
Status	Complete
Type	Hackspace Infrastructure
Live Status	{{{livestatus}}}
QR code

The Spray booth was an infrastructure project completed by the infrastructure team in 2013.