ToDo
The Big ToDo List
Stuck for something to do or have a bit of free time you can donated to the space? There's usually some small jobs that need doing but since the move to 2.0 the list has gotten very big. You can help out by doing a job of the list, remember the space is what it's members make it.
Feel free to add anything you want to this list!
Perpetual jobs / Nice things to do for the Hackspace
- Tidy a workbench
- Put some tools away
- Charge some batteries
- Wash some dishes
- Restock the fridge
- Replenish a biscuit jar
- Sweep something up
- Take some rubbish out (see Waste and Recycling Initiative --Michael Erskine 10:26, 27 May 2011 (BST))
- Clean a loo
General hackspace todo stuff
Organise this fecking page.Done. Ish. --Davidhayward 16:30, 28 May 2011 (BST)
First few can also be found on the Opening Party Organisation Page
Signage and information:
Finish the HDoneski --Tony_S- Signs outside. Roden street door to point round corner - --Dominic 22:55, 20 May 2011 (BST) To complete by 25/05/2011
- Sign outside our main entrance - Tony will touch up on 25/05/2011
- Stencil H arrows on building.
- Membership propaganda to pin board by window - --Dominic 22:55, 20 May 2011 (BST) To complete by 28/05/2011
- Instructions above the can crusher - --Dominic 23:08, 20 May 2011 (BST) To complete by 28/05/2011
- Members only notices on doors
- Members only on components
- Resistor chart above components
Blue office:
move the stuff on the old deskdone --'RepRap' Matt 00:28, 23 May 2011 (BST)tidy away the last of the book and boxes on form the floordone but for the roll's of paper --'RepRap' Matt 00:28, 23 May 2011 (BST)move a table in from studio and spread the chairs arounddone--'RepRap' Matt 00:28, 23 May 2011 (BST)- Clean out A0 printer
Workshop:
Tools have been sorted--'RepRap' Matt 21:01, 24 May 2011 (BST)- Clean work benches and sweep floor
Shift wood, I'd like it moved from the workbench to the other end of the roomdone --'RepRap' Matt 21:01, 24 May 2011 (BST)Remove white board from far wall of workshop- Done- Rebuild other big bench --Lwk
- Change of plan, splitting bench in half and mounting against wall under south windows, to be done some time after the party --'RepRap' Matt
- Big Whiteboard to right of door at west end of workshop
- Organise racking
Studio:
Mount the uk map, pin board by members window for nowdone but would long term a bigger scale uk map might be needed --'RepRap' Matt 12:13, 22 May 2011 (BST)drawing pins for the mapordered 100 of each green, red, blue 5mm head map pins from ebay --'RepRap' Matt 12:13, 22 May 2011 (BST)- Green Nottinghack member
- Blue Visitors
- Red other Hackspace's friends and places we have visited
Fix down cinema seatsdone --'RepRap' Matt 21:01, 24 May 2011 (BST)- Small White board outside toilet door
- Projector screen mounts
- Projector mounts. Vga cables, power points, audio
- 5.1 sound system
Members Storage Rooms
Tidy members storagedone --'RepRap' Matt 21:01, 24 May 2011 (BST)
Web:
Blog/wiki directions pages, revise add an actual pic of the door!Done --Davidhayward 16:25, 28 May 2011 (BST)Photograph door with new H signDone --Davidhayward 16:18, 28 May 2011 (BST)Upload photos, edit website and wikiDone --Davidhayward 16:18, 28 May 2011 (BST)
Bigger jobs:
- Wall of friends
Sand wallDone --Davidhayward 18:21, 25 May 2011 (BST)Wash wallDone --Davidhayward 18:21, 25 May 2011 (BST)Dust wallDone --Davidhayward 18:21, 25 May 2011 (BST)Paint wall whiteDone --Davidhayward 10:29, 27 May 2011 (BST)- Second coat
- Third coat
Email vague peopleDone --Davidhayward 18:21, 25 May 2011 (BST)- Generate artwork
- Draw names on wall
- Bike area in workshop
Clear bike area- Done --Davidhayward 11:25, 24 May 2011 (BST)Order bike hooks and pump--Davidhayward 12:00, 24 May 2011 (BST) (Actually done day before)Move tools and workstand from CarltonDone --Davidhayward 15:16, 28 May 2011 (BST)- Move cupboard from Carlton (David)
- Hang vertical bike hooks (David)
- Hang horizontal bike hooks
- Mobile phone charging station
Get phone charging box bitsDone --Davidhayward 11:48, 28 May 2011 (BST)Build phone charging boxDone --Davidhayward 11:48, 28 May 2011 (BST)Hang phone charging box and decorate with lovely postcardDone --Davidhayward 11:48, 28 May 2011 (BST)- iPhone charging: Hack USB hub PCB to apply 2.4 and 2.8 reference voltages to signal pins. iPhones won't charge without this.
Unsorted Jobs:
- Cupboards in kitchen
- Sink in workshop
- Desks for office
- Label and sort rest of components
- More draws and parts bins for components
- Tool storage rack/shelf left of workshop door
- Tool storage on first south window bay, possible small shelf for bench grinder
- Screws, bolts, washers, nuts second south window bay
- 3rd south window bay for cnc or laser
- Far end wall of workshop for materials storage
- Fix top of far bench down (leave as fabric cutting table though - --Davidhayward 16:39, 28 May 2011 (BST))
- Move pillar drills (and other back to wall tools) to east wall
- Lots more power sockets in workshop!
- More power sockets in blue office
- Rewire light switchs, studio and blue office first
- Look at changing light fitting (toilet first)
- Extra light to soldering area
- More shelves for blue office wall of boxes
Shelf for Holly and network in opposite corner of blue officedone Holly & Kryten now live in members storage room --'RepRap' Matt 00:28, 23 May 2011 (BST)Extend phone socket to Holly new location (cat5)done swapped for different master socket in member storage and two slave sockets wired in --'RepRap' Matt 00:28, 23 May 2011 (BST)Big White board to green wallNope! IMO we should keep that wall uncluttered, it makes a strong visual impression --Davidhayward 16:30, 28 May 2011 (BST)- Darkroom in kitchen(very not urgent)
- Cat5 everywhere
- Big clock mounted in workshop
- tetris clock to studio pillar
- Nottingham local map to east window bay in studio, walking routes to stations, ATM, pubs, food, tesco, parking
Uk map, world map, on mdf/ply, drawing pins for members, visitors, other hackspaces, place we have been. One colour each! Were? In studio- Spare set of keys to stay in the space! Member can borrow to cut sets
- Copies of the Yale keys to few members (RFID fail)
- Desktop pc in blue office for general use (and reprap)
- Pc for cnc mill
- Broken windows, glass and frames
- Patch up holes in doors
- Slowly paint Walls (including geek art)
- Space heater and gas costs for winter
- Investigate mag door release on outer door
- Automate Facebook - No Thanks --Dominic 23:28, 20 May 2011 (BST)
- Allow upload to flickr group from office pc
- Members sign up system, quick "I want to join" auto email. Followed by James system
- Paint hall way green
- Make google events calendar more use/widely known
- Coat hooks
- Remove draws from the old desk in the office
- add power sockets to textile room
Donations pots
- toilets
- Kitchen for tea/coffee/milk as not part of snackspace
- Studio by big notice board
- In workshop near materials
- Solder bench
- Textiles room
Pledge pots
- Office for reprap
- Workshop for laser
- Kitchen for microwave/fridge?
Question marked items
- Find somewhere to mount road side phones, either end of the space? Talk to just each other? Or turn into VoIP handsets? How to dial?
- Auto door closer to members only areas?
- Wet area to keep etch tank setup? - Multi purpose wet area please
- Spare bulbs?
- Floor in workshop, sand? Paint?
- Members pic wall??
- Double glaze??
- Mix NottingHack flickr stream and group?
Wiki docs for projects
- Reprap Prusa:- Printed parts list, bom, pledges for bits, status, instructions Running costs
- created page and non-printed BOM with up to date got/not-got --Michael Erskine 09:43, 23 May 2011 (BST)
- Cnc mill:- instructions, pledge/running cost, suitable materials
- We have pledges enough (I believe) to pay for a full MyDIYCNC kit...
- http://www.mydiycnc.com/
- http://www.wired.com/gadgetlab/2011/01/diy-cnc-machine-just-390/
- http://twitter.com/#!/MyDIYCNC
- http://www.publicknowledge.org/blog/pk-know-podcast-22
- Big track:- convert to arduino, lipo battery, recreat software
- Hackspace instrumentation:- general page, mqtt systems, cacti, irc, twitter, each node own page
- laser cutter - --Dominic 23:08, 20 May 2011 (BST) To update by 01/06/2011
- Tetras clock:- parts number of identifiable stuff, logic probe busses, build control input
- Kinect:-
Other wiki pages/jobs
- Barcamp prep Wiki page
- Wiki using the hackspace guide lines/info
- Wiki theme?
- Wiki templates for events/projects/ members page
- SnackSpace
- Using the Hackspace
- First in-last out/ building rules
- New Theme & layout
- Templates for:-
- Pledges
- Event planning and feedback
- Projects
- User pages
- Move Doc's Current Events to Events:Planning
- Current events Page, Google calender, links to Blog/Events:
- Community portal, Drop it
- Key holders list
Sever naming list to wikidone --'RepRap' Matt 09:18, 22 May 2011 (BST)
Stuff for the board
- Incorporation!
- Accounts, bank and paypal -> google docs
- Budget predictions update with real figures -> google docs
- Form DocLittle:-
- Publicity and promotion
- Infrastructure (physical)
- Website
- Workshops
- Accounts and admin
- Rates - --Dominic 22:55, 20 May 2011 (BST) To check make enquiry by 22/05/2011
- Utils, there's letter's about the gas - Please put this on the red notice board above MARVIN --Dominic 22:55, 20 May 2011 (BST)
Notes
Add your thoughts, requirements and musings about a job here. If it gets too big, move it to a new page under this (for example, ***Todo/Fridge***