Laser Area: Difference between revisions
Explicitly mention CNC tools have moved here |
Updated page to reference the new Boxford laser and that the A0 has been taken offline. |
||
Line 11: | Line 11: | ||
==Tools and equipment== | ==Tools and equipment== | ||
The [[laser cutter]]s require induction and booking. The space has | The [[laser cutter]]s require induction and booking. The space's main laser is the [[Boxford_BGL1390_Laser_Cutter|Boxford BGL1390]]. Previously the space has used 2 lasers; the larger [[Silvertail A0 Laser cutter]] and smaller [[Greyfin A2 Laser Cutter]]. | ||
In 2022 the [[Superbox CNC Router]] and CNC Lathe were relocated to this area. | In 2022 the [[Superbox CNC Router]] and CNC Lathe were relocated to this area. | ||
Line 34: | Line 34: | ||
==History== | ==History== | ||
Late 2019, the laser area was extend into the old [[Electronics Area]] that ran along the wall between the [[Studio]] door and [[Screen Printing Area]] partition wall. This is also when the second A2 laser cutter was installed. | Late 2019, the laser area was extend into the old [[Electronics Area]] that ran along the wall between the [[Studio]] door and [[Screen Printing Area]] partition wall. This is also when the second A2 laser cutter was installed. | ||
As of February 2024, the main Silvertail A0 laser cutter has been taken offline and moved into the studio until a buyer is found, this is to allow the setting up of the new Boxford BGL1390 laser cutter in the space that was purchased from the [[Boxford_Laser_Cutter_2023_Pledge_Drive|2023 laser pledge. ]] | |||
{{Location List}} | {{Location List}} | ||
[[Category:Location]] | [[Category:Location]] | ||
[[Category:Laser Cutter]] | [[Category:Laser Cutter]] |
Latest revision as of 12:05, 5 February 2024
Information on this page is out of date. The specific problem is: Photo and floorplan shows old layout. Please help update the page if you can. The talk page may contain suggestions. (November 2019) |
Laser Area | |
---|---|
Intended Use | Workshop area devoted to the Laser Cutter |
Team | Laser |
Floor | Upstairs |
Map | |
Locations: all pages {{}} |
The Laser Area is where the Laser cutters are located along with associated equipment and storage. It is accessed via the Workshop, via the Studio double doors.
Tools and equipment
The laser cutters require induction and booking. The space's main laser is the Boxford BGL1390. Previously the space has used 2 lasers; the larger Silvertail A0 Laser cutter and smaller Greyfin A2 Laser Cutter.
In 2022 the Superbox CNC Router and CNC Lathe were relocated to this area.
Safety
The only tool within this area where personal protective equipment is advised is the Superbox CNC Router. When operating this tool, please be aware of those working around you and encourage safe working practices. I.e. Remove tripping hazards from the gangways around the machine.
Cleaning and maintenance
Please improve this page by adding a photo. The specific reason is: Pic of shop vac needed. Click to upload an image, help with using images can be found here. The talk page may contain suggestions about suitable images. (March 2019) |
Always leave the area as you would like to find it. Build time into your schedule for cleaning up:
- Empty the bin if it's full. The Bizspace bins are located in Roden Street. There's no competition to see how high you can pile the rubbish! Replacement bin liners can be found in the Toilets, on the shelf between the cubicles and the window.
- Carefully consider whether an off-cut is really useful to another member. Please don't use the scrap trays as an extension of the bin. Don't leave any work or scrap in the machine. Useful scrap is stored on the rack next to the machine. Waste scrap should be put in the bin. When the bin is full remove and tie bag, Roden House dump in skips, see Waste and Recycling Initiative.
- Tidy up after yourself! Please clean up a bit more mess than you made! If you drop something on the floor, please pick it up. Dirty cups should go in the dish washer, drinks cans and pizza boxes in the bin and put tools back were they belong.
- Please pick up all off-cuts / loose parts from the bed, so it's ready for the next user.
- Consider volunteering to help a hackspace team and contributing to the running of the hackspace.
History
Late 2019, the laser area was extend into the old Electronics Area that ran along the wall between the Studio door and Screen Printing Area partition wall. This is also when the second A2 laser cutter was installed.
As of February 2024, the main Silvertail A0 laser cutter has been taken offline and moved into the studio until a buyer is found, this is to allow the setting up of the new Boxford BGL1390 laser cutter in the space that was purchased from the 2023 laser pledge.
Locations | |
---|---|
Upstairs | Comfy Area • Studio • Members Storage • Textiles Workshop • Kitchen • Toilets • Workshop • Dusty Area • Metalworking Area • Spray Booth • Laser Area • CNC Area • Screen Printing |
Downstairs | 3D Printer Area • Electronics Area • Blue Room • Team Storage • Metalworking Downstairs • Members Storage Downstairs • Classroom • Bike Area • Main Corridor • CNC Corridor |