Metalworking Area

Metalworking Area
Intended Use	Working on Metalworking projects
Manufacturer	{{{manufacturer}}}
Model	{{{model}}}
Team	Metalworking
Floor	Upstairs
Area	[[{{{parentlocation}}}]]
Map
Locations:   all pages                 {{}}

The Metalworking Area is primarily for working on metalworking projects; it can also be used for working with plastics. It is looked after by the Metalworking team.

Tools and equipment

Tools available in this area include:

• Bridgeport Mill
• Myford Lathe

A list of tools with wiki pages is available here: Tools and Equipment in Metalworking Area

There are many more tools, particularly metrology & hand tools, that are not listed on the wiki. If you are knowledgeable about something that isn't listed please consider creating a page for the tool.

Important notes

Tools in this area should always be returned to the area after use.

Safety

A lot of the machines in this area are dangerous with the potential to cause significant harm. Your safety is your own responsibility.

When working with heavy equipment such as Machine Vices or large projects, Steel toe cap boots are recommended but not required.

When using machines that have spinning parts:

• Remove loose clothing, necklaces or lanyards
• Do not wear gloves or long sleeves
• Protect your eyes with safety glasses

Other equipment such as the Welders require:

• Welding Mask
• Welders Gloves

Availability

This area, or the tools in it does not require booking and can not be booked.

Materials and consumables

-

Cleaning and maintenance

Always leave the area as you would like to find it. Build time into your schedule for cleaning up.

There is a shop vac in the area that can be used for removing swarf from large machines and the floor. For small cleaning jobs there is a dust pan and brush located on the wall above the Metalwork Area Tray Store.

Once a month the tools are checked and maintenance carried out as required.

Problems and issues

If there is a problem in the Metalworking Area contact the Metalworking team. If a tool is broken or damaged, report it to the team.

The current issues and things not working in this area are as follows.

• Startrite Bandsaw - Blade Needs replacing - March 2019

Tasks that currently need doing

-

Future plans

-

See also

• Power